Does a Heavier Ball Rise as High? Vertical Ball Launcher FRQ

Pause here: To build true exam stamina, attempt these questions on your own before checking the model answers.

FRQ: Change in Mechanical Energy During and After a Launch — The Vertical Ball Launcher

Assessments aligned to 2026 AP Physics 1 standards

Qualitative/Quantitative Translation (QQT)  |  CHALLENGE  |  8 points  |  20 min

▤ Scenario

A launcher uses a plunger to push a ball straight up. In every launch the ball starts at rest, and the plunger exerts a constant upward force of magnitude F_L on the ball while the ball moves up through a distance d. The ball then leaves the plunger and continues upward, reaching a maximum height H above the point at which it left the plunger, as shown in Figure 1.

Figure 1. The ball at rest, at the instant it leaves the plunger, and at its maximum height.

In Launch 1 the ball has mass m and reaches a maximum height H_1 above the release point. In Launch 2 the ball has mass 2m and reaches a maximum height H_2 above the release point. The force F_L and the distance d are the same in both launches, and F_L is greater than the weight of either ball. Air resistance is negligible.

✎ Free Response Questions

Part A

Indicate whether H_2 is greater than, less than, or equal to H_1 by writing one of the following.

• H_2 > H_1

• H_2 < H_1

• H_2 = H_1

Justify your answer using qualitative reasoning beyond referencing equations.

Part B

Starting with conservation of energy, derive an expression for the maximum height H above the release point reached by a ball of mass m. Express your final answer in terms of F_L, d, m, and physical constants, as appropriate. Begin your derivation by writing the fundamental physics principle or an equation from the reference information.

Part C

Justify how your derived equation in part B is or is not consistent with your reasoning in part A.

❖ Answer Key & Scoring Guide

▸ earns credit  ⚠︎ common error, partial credit  ✗ common error, no credit

Points are independent and there are no deductions. ▸ criteria follow College Board's published scoring standard; ⚠︎ and ✗ lines are TheScienceCube teaching commentary, not College Board rubric.

Part A — Model Answer

H_2 < H_1

The plunger exerts the same force through the same distance in both launches, so it does the same work and transfers the same amount of energy to each ball–Earth system. At the maximum height the ball is momentarily at rest, so all of that energy is stored as gravitational potential energy.

The heavier ball needs twice as much energy for every bit of height it gains, so the same energy lifts it only half as far in total. In both launches the first part of the rise, the distance d, happens while the plunger is still pushing. What is left for the rise after release is therefore smaller for the heavier ball. Equal work means equal energy, not equal height.

Scoring (3 points):

▸ A1 — 1 point: For selecting H_2 < H_1.

▸ A2 — 1 point: For indicating that the plunger does the same work on, or transfers the same energy to, both systems.

▸ A3 — 1 point: For linking the greater mass to a smaller rise for the same energy: for example, that more energy is needed for each unit of height gained, or that the heavier ball leaves the plunger with less kinetic energy.

⚠︎ Common error (partial credit): selects H_2 = H_1 because the same force acts through the same distance, so the same energy is transferred — earns 1 of 3 points.

✗ Common error (no credit): selects H_2 = H_1 because objects in free fall move the same way whatever their mass. That is true only for the same release speed, and the two balls leave the plunger at different speeds.

Part B — Model Answer

For the ball–Earth system, the plunger is the only external force that does work. From the start of the push (ball at rest) to the maximum height (ball at rest), conservation of energy gives

W_ext = ΔK + ΔU_g

The plunger does work only while it is in contact with the ball, so W_ext = F_L d. The ball rises a total distance d + H, and ΔK = 0.

F_L d = 0 + mg(d + H)
H = F_L d / (mg) − d

The work is done over d only, but the potential energy is gained over the whole rise d + H.

Scoring (3 points):

▸ B1 — 1 point: For beginning with a statement of conservation of energy that relates the work done by the plunger to the change in the energy of the ball–Earth system.

▸ B2 — 1 point: For the work written as F_L d and the change in gravitational potential energy written for the entire rise, mg(d + H), or the equivalent in a correct two-stage solution.

▸ B3 — 1 point: For a correct final expression for H.

Scoring Note: A correct, isolated, final expression for H earns points B2 and B3.

⚠︎ Common error (partial credit): ignores the height gained during the push, writing F_L d = mgH — earns 1 of 3 points.

⚠︎ Common error (partial credit): lets the plunger do work over the whole rise, writing F_L (d + H) = mg(d + H) — earns 1 of 3 points.

Part C — Model Answer

The equation H = F_L d / (mg) − d has the mass only in the denominator of the first term. When the mass is doubled, that term is halved while the second term, d, is unchanged, so H becomes smaller. That agrees with the selection H_2 < H_1 in part A.

The reasoning matches as well. The numerator F_L d is the same work in both launches, which is the “same energy” argument of part A. Dividing by mg turns that energy into a total rise, which is smaller for the heavier ball. Subtracting d removes the part of the rise that happened during the push, so H falls to less than half when the mass doubles.

Scoring (2 points):

▸ C1 — 1 point: For correctly describing how H depends on mass in the equation derived in part B: H decreases as m increases, or the response's own equation is read correctly.

▸ C2 — 1 point: For stating whether that dependence is consistent with the reasoning in part A, in a way that agrees with the two responses.

⚠︎ Common error (partial credit): states that H is exactly halved when the mass doubles, reading only the first term, and concludes the parts are consistent — earns 1 of 2 points.

✗ Common error (no credit): states only that the two parts are consistent, with no reference to how H depends on mass in the equation.

Work Done by an External Force: Change in Mechanical Energy During and After a Launch

Work Done by an External Force: Change in Mechanical Energy During and After a Launch (QQT)

Mass m
Plunger force FL
Push distance d
Simulation by The Science Cube — www.TheScienceCube.com
Complete and Continue  
Discussion

0 comments